User Manual

FLX UC 1000 and FLX UC 1500 Cable Clamp
1
2
3
Use the cable clamp to secure the cables connected
to the UC products and support that they are not
unintentionally removed.
(1) Place the bottom part of the cable clamp into the
cable cavity of the UC unit before connecting the
cables. (2) Once the USB and extension microphone
cables are connected and fit into the respective
areas of the cable clamp, (3) place the second part of
the cable clamp on top, and fasten the clamp using
the two screws included with the kit. The Network
cable sits outside of the cable clamp.
Copyright 2018 Yamaha Unified Communications, Inc.
Yamaha Unified Communications, Inc.
144 North Road #3250
Sudbury, MA 01776 USA
[phone]
[e-mail]
Yamaha UC EMEA
190 High Street Tonbridge,
Kent
TN9 1BE, UK
[phone]
[e-mail]
Yamaha UC APAC
+
852.8108.8820
[e-mail]