User Manual

FM Essential Manual
2
FM Screen
On this screen, you can use the FM tone generator for real-time synth performances and to
edit voices.
1 Voice-related information
1-1 Voice number
1-2 Model name of currently selected FM
tone generator
1-3 Voice category
1-4 Polyphony
1-5 Voice name
The following two methods can be used to
select voices.
•Tap the [L] and [R] buttons on the left
and right.
•Tap the Voice name area (1-5) ; tap a
bank in the displayed list of banks; and
then tap a voice in the displayed list of
voices.
NOTE
By connecting your MX49 BK/BU/WH or MX61 BK/
BU/WH just once, you can permanently enable all
banks and voices.
2 Used to store voices
Voices can be stored as follows.
Tap [SAVE]; tap a destination in the
displayed list; change the voice name and
category; and then tap [SAVE].
NOTE
By connecting your MX49 BK/BU/WH or MX61 BK/
BU/WH just once, you can permanently enable
voice storage.
3 Ball controller
Touch and drag in this area to modulate
the sound by simultaneously changing
multiple parameters based on the ball
position. The current waveform is shown in
the background.
4 Used to return the ball to its default
position (i.e., the position when the voice
was selected)
1
1
-1
3
4
2
1
-2
1
-3
1
-4
1
-5