User Manual

FM Essential Manual

EDIT Screen

Tap [EDIT] on the FM screen to display the EDIT screen. On this screen, you can adjust

parameters to edit voices.

When you select an item to edit in the top

area, (1), the corresponding parameters are

displayed below. You can then adjust the

individual parameters.

Using knob parameters

Touch a knob and drag horizontally or vertically

to change its value.

Double-tap to return to the saved value (i.e.,

the original data).

If you tap and hold without dragging, the

popup, (2), is displayed, allowing you to make

adjustments by using a large knob parameter.

To close the popup, tap anywhere outside the

parameter display area (i.e., outside 2).

NOTE

The default operating mode for knob parameters

is linear—i.e., touch and then slide vertically or

horizontally. However, you can also choose rotary

mode to touch and then turn the knob. The procedure

for changing the operating mode is as follows:

1. Tap the

Settings icon in the top right corner of

the FM screen to open the Settings screen.

2. Select either [Linear] or [Rotary] by using the Knob

Operation parameter.