Owner`s manual

Control functions
17
● Do not use an automotive cigarette light-
er or other accessory with a plug that
gets hot because the jack can be dam-
aged.
ESU13523
Brake lever
The snowmobile is stopped by braking the en-
tire drive system.
Squeeze the brake lever towards the handle-
bar grip to stop the snowmobile.
TIP
When the brake lever is squeezed, the brake
light comes on.
The brake lever is equipped with a position
adjuster.
To adjust the brake lever position
1. Loosen the locknut.
2. While lightly pushing the brake lever in di-
rection (a), turn the adjusting bolt to set
the brake lever to the desired position.
3. Tighten the locknut securely after adjust-
ing the brake lever position.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
Maximum rated capacity:
DC 12 V, 2.5 A (30 W)
1. Brake lever
1. Locknut
2. Adjusting bolt
1. Parking brake lever
U8HK13E0.book Page 17 Monday, May 9, 2011 4:06 PM