Owner`s manual

Control functions
34
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
FX10
The compression damping force can be ad-
justed by turning the adjusting screw.
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).
1. Compression damping force adjusting bolt
(for fast compression damping)
2. Compression damping force adjusting
screw (for slow compression damping)
Compression damping force setting (for
fast compression damping):
Minimum (soft):
4 turn(s) in direction (b)*
Standard:
2 turn(s) in direction (b)*
Maximum (hard):
0 turn(s) in direction (b)*
* With the adjusting bolt fully turned in
direction (a)
Compression damping force setting (for
slow compression damping):
Minimum (soft):
16 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
(a)
(b)
1
2
1. Rebound damping force adjusting dial
Rebound damping force setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting dial fully turned in
direction (a)
1. Compression damping force adjusting
screw
U8HK13E0.book Page 34 Monday, May 9, 2011 4:06 PM