Owner`s manual

Periodic maintenance and adjustment
57
1. Place the snowmobile on a level surface
and apply the parking brake.
2. Remove the shroud, the left side cover,
and the right side cover. (See page 52 for
removal procedures.)
3. Remove the headlight unit stay quick fas-
teners and disconnect the air tempera-
ture sensor coupler.
4. Unhook the air filter case cover fasteners.
5. Lift the headlight unit and headlight unit
stay, and then slide the air filter case cov-
er toward the right side of the snowmobile
and remove it.
6. Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
7. Place the air filter element frame in the
original position, and then install the air
filter case cover.
8. Hook the fasteners onto the air filter case
cover.
1. Quick fastener
2. Air temperature sensor coupler
1. Air filter case cover fastener
1. Air filter case cover
U8HK13E0.book Page 57 Monday, May 9, 2011 4:06 PM