Owner`s manual

Control functions
27
Center shock absorber
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
Rear shock absorber
To increase the compression damping force
(for fast compression damping), turn the ad-
justing bolt in direction (a). To decrease the
compression damping force, turn the adjust-
ing bolt in direction (b).
To increase the compression damping force
(for slow compression damping), turn the ad-
justing screw in direction (a). To decrease the
compression damping force, turn the adjust-
ing screw in direction (b).
1. Compression damping force adjusting
screw
Compression damping force setting:
Minimum (soft):
12 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
2 click(s) in direction (b)*
* With the adjusting screw fully turned in
direction (a)
1. Rebound damping force adjusting dial
1
(b) (a)
Rebound damping force setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting dial fully turned in di-
rection (a)
1. Compression damping force adjusting bolt
(for fast compression damping)
2. Compression damping force adjusting
screw (for slow compression damping)
Compression damping force setting (for
fast compression damping):
Minimum (soft):
4 turn(s) in direction (b)*
Standard:
2 turn(s) in direction (b)*
Maximum (hard):
0 turn(s) in direction (b)*
* With the adjusting bolt fully turned in
direction (a)
(a)
(b)
1
2
U8HK11E0.book Page 27 Thursday, April 9, 2009 8:43 AM