Owner`s manual

Control functions
29
2. To increase weight transfer, turn the ad-
justing nut in direction (a), and to de-
crease weight transfer, turn it in direction
(b). WARNING! Never adjust the con-
trol rods beyond the maximum set-
ting, indicated by red paint; otherwise,
they could be damaged, which could
lead to an accident or injury.
[EWS00173]
3. Tighten the locknut while holding the ad-
justing nut in place. NOTICE: Always
tighten the locknut against the adjust-
ing nut, and then tighten the locknut to
the specified torque.
[ECS00860]
1. Locknut
2. Control rod adjusting nut
1. Red paint area
2. Adjustable range
3. Standard position
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lbf)
U8HK11E0.book Page 29 Thursday, April 9, 2009 8:43 AM