Service manual
5-35
E
POWR
REDUCTION DRIVE GEAR
Drive shaft installing
1. Install:
• Drive shaft
NOTE:
Press in the direction of the arrow.
2. Install:
• Oil seals 1
Distance a:
8.9–9.3 mm (0.35–0.37 in)
1
a
Drive coupling installation
1. Install:
• Drive coupling 1
NOTE:
While holding the flywheel magneto 2 with the
sheave holder 3, tighten the drive coupling
with coupler wrench 4.
Coupler wrench:
YW-06551/90890-06551
Sheave holder:
YS-01880-A/90890-01701
1
4
2
3