Service manual

5-41
E
POWR
GENERATOR AND STARTER MOTOR
SERVICE POINTS
Flywheel magneto removal
1. Remove:
Flywheel magneto bolt 1
Washer
NOTE:
While holding the flywheel magneto 2 with the
sheave holder 3, loosen the flywheel magneto
bolt.
Sheave holder:
YS-01880-A/90890-01701
2. Remove:
Flywheel magneto 1
Woodruff key
NOTE:
While holding the flywheel magneto with
sheave holder 2, remove the flywheel mag-
neto with the rotor puller 3.
Rotor puller:
YM-01082/90890-01080
Starter clutch inspection
1. Check:
Starter clutch rollers 1
Damage/wear Replace.