Service manual
6-27
E
JET
PUMP
BEARING HOUSING
Bearing removal
1. Remove:
• Bearing
NOTE:
• Install the bearing with the same special
tools that were used for removal.
• Support the intermediate housing with steel
blocks
1
and press the bearing.
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06156/90890-06626
Bearing, intermediate drive shaft, and
grease hose inspection
1. Inspect:
• Bearing
Rotate the inner race by hand.
Damage/rough movement
→
Replace.
• Intermediate drive shaft
Damage/pitting
→
Replace.
• Grease hose
Cracks/wear
→
Replace.
Driven coupling inspection
1. Inspect:
• Driven coupling
• Driven coupling damper
Damage/wear
→
Replace.