Service manual

6-28
E
JET
PUMP
BEARING HOUSING
Bearing installation
1. Install:
• Circlip (rear)
2. Install:
• Bearing
NOTE:
Support the intermediate housing with steel
blocks
1
and press the bearing.
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06156/90890-06626
Oil seal installation
1. Install:
• Oil seal
NOTE:
Before installing the oil seal, lubricate the clip
glove with water resistant grease.
2. Install:
• Intermediate drive shaft
NOTE:
Support the intermediate housing with steel
blocks
1
and press the driven coupling shaft.
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06156/90890-06626
Distance
a
:
6.8–7.2 mm (0.27–0.28 in)
Distance
a
:
45.5–46.5 mm (1.79–1.83 in)
a