Service manual

7-11
E
– +
ELEC
ELECTRICAL ANALYSIS
ELECTRICAL ANALYSIS
INSPECTION
CAUTION:
• All measuring instruments should be han-
dled with special care. Damaged or mis-
handled instruments will not measure
properly.
• On an instrument powered by dry batter-
ies, check the battery’s voltage periodi-
cally and replace the batteries if
necessary.
Digital tester
NOTE:
Throughout this chapter the digital tester’s part
number has been omitted. Refer to the follow-
ing part number.
NOTE:
“” indicates a continuity of electricity;
i.e., a closed circuit at the respective switch
position.
Digital circuit tester:
YU-34899-A/90890-03174