Service manual
7-51
E
– +
ELEC
INDICATION SYSTEM
Diagnostic display
1. Check:
• Diagnostic display
Does not display
→
Replace the multi-
function meter.
Checking steps:
• Remove the coupler of the sensor indi-
cated in the multifunction meter.
• Check if “Irregular” is indicated in the
Diagnosis Record of the Yamaha Diag-
nostic System.
• Start the engine and check that the
engine check warning indicator comes on
and the buzzer sounds.
• Press the hour meter/voltmeter display
select switch
1
and the speedometer
display switch
2
for 8 seconds and
check if an error code is indicated on the
multifunction meter.
2
1