Service manual

9-2
E
TRBL
ANLS
INTRODUCTION
HARDWARE REQUIREMENTS
Make sure that your computer meets the following requirements before using this software.
NOTE:
• The amount of memory and the amount of free space on the hard disk differs depending on the
computer.
• Using this software while there is not enough free space on the hard disk could cause errors and
result in insufficient memory.
• This software will not run properly on some computers.
• This software is not compatible with USB ports. Be sure to install it into a PC that has an RS232C
(Dsub-9 pin) port.
• When starting up this program, do not start other software applications.
• Do not use the screen saver function or the energy saving feature when using this program.
• If the ECM is changed, restart the program.
• Window XP is a multiuser operating system, therefore, be sure to end this program if the login
user is changed.
Computer: IBM-compatible computer
Operating system: Microsoft Windows 95, Windows 98, Windows Me, Windows 2000, or Win-
dows XP (English version)
CPU:
Windows 95/98: i486X, 100 MHz or higher (Pentium 100 MHz or higher recommended)
Windows Me/2000: Pentium, 166 MHz or higher (Pentium 233 MHz or higher recommended)
Windows XP: Pentium, 300 MHz or higher (Pentium 500 MHz or higher recommended)
Memory:
Windows 95/98: 16 MB or more (32 MB or more recommended)
Windows Me: 32 MB or more (64 MB or more recommended)
Windows 2000: 64 MB or more (128 MB or more recommended)
Windows XP: 128 MB or more (256 MB or more recommended)
Hard disk free space: 20 MB or more (40 MB or more recommended)
Drive: CD-ROM drive
Display: VGA (640
×
480 pixels), (SVGA [800
×
600 pixels] or more recommended)
256 or more colors
Mouse: Compatible with the operating systems mentioned above
Communication port: RS232C (Dsub-9 pin) port
Printer: Compatible with the operating systems mentioned above