Service manual

3-1
E
INSP
ADJ
MAINTENANCE INTERVAL CHART
MAINTENANCE INTERVAL CHART
The following chart should be considered strictly as a guide to general maintenance intervals.
Depending on operating conditions, the intervals of maintenance should be changed.
(
●
) This mark indicates maintenance that you may do yourself.
(
❍
) This mark indicates work to be done by a Yamaha dealer.
*1: Grease capacity: 33.0–35.0 cm
3
(1.11–1.18 oz)
*2: Grease capacity: 6.0–8.0 cm
3
(0.20–0.27 oz)
MAINTENANCE INTERVAL INITIAL
THEREAFTER
EVERY
PAGE
10 hours 50 hours 100 hours 100 hours 200 hours
ITEM
6
months
12
months
12
months
24
months
Spark plug Inspect, clean, adjust
●●●●
3-21
Lubrication points Lubricate
●●
3-29
Intermediate housing Lubricate
❍
*1
●
*2
●
*2 3-31
Fuel system Inspect
❍❍
3-9
Fuel tank Clean
❍❍
3-9
Fuel filter Inspect, clean
❍❍
3-9
Trolling speed Inspect
❍❍❍
3-8
Throttle shaft Inspect
❍❍
—
Cooling water passages Flush
●
(after
every use)
—
Water inlet strainer Inspect, clean
❍❍
3-27
Bilge strainer Clean
❍❍
3-27
Electric bilge pump
strainer
Inspect, clean
❍❍
3-28
Impeller Inspect
●●●
3-26
Steering cable Inspect
●●●
3-2
Steering master Inspect
❍❍❍
3-2
QSTS mechanism Inspect, adjust
●
(before
every use)
❍❍
3-5
Shift cable and
mechanism
Inspect, adjust
❍❍
3-7
Throttle cable Inspect, adjust
●●
3-3
Stern drain plugs Inspect, replace
❍❍
3-28
Battery Inspect
●
(inspect
fluid level
before
every use)
❍❍
3-23
Rubber coupling Inspect
❍
—
Engine mount Inspect
❍
5-7
Nuts and bolts Inspect
❍❍❍
—
Air filter Inspect
●
3-20
Engine oil Replace
❍❍❍
3-18
Engine oil filter Replace
❍
3-18
Valve clearance Inspect, adjust
❍
3-10