Service manual

3-12
E
INSP
ADJ
POWER UNIT
5. Remove:
Timing chain tensioner cap bolt
1
Gasket
1
6. Turn the timing chain tensioner rod fully
clockwise with a thin screwdriver
1
.
NOTE:
Make sure that the tensioner rod has been fully
set clockwise.
1
7. Remove:
Intake camshaft caps
Exhaust camshaft caps
Timing chain
(from the camshaft sprockets)
Intake camshaft
Exhaust camshaft
NOTE:
Refer to CAMSHAFTS in Chapter 5.
When removing the timing chain and cam-
shafts, fasten the timing chain with a wire to
prevent it from falling into the crankcase.