Installation manual

Step 6: Place the remaining enclosure on a non-metallic container and place on the top rack of the oven.
Step 7: Turn the oven heating element off and allow the enclosure to sit in the oven for 15 minutes
Warning: The plastic enclosure will be hot when taken out of the oven (duh). Use
some kind of protection such as an oven mitt or a towel.
Step 8: Test the strength of the sealant by pulling the clear lens from the plastic enclosure. If the sealant
is still too strong place back in the oven and bake for an additional 5 minutes. (TIP: Carefully apply
outward pressure unto the 4 tab with flathead screwdriver and pull the clear lens)
Step 9: Retest if necessary.