Operation Manual

ManualsBrandsYamaha ManualsMotorFZ8-SA

PERIODIC MAINTENANCE AND ADJUSTMENT

6-37

6

1. Disconnect the headlight coupler,

and then remove the headlight

bulb cover.

2. Unhook the headlight bulb holder,

and then remove the burnt-out

bulb.

3. Place a new headlight bulb into po-

sition, and then secure it with the

bulb holder.

4. Install the headlight bulb cover,

and then connect the coupler.

5. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAU24115

Replacing the tail/brake light

bulb

1. Remove the passenger seat. (See

page 3-18.)

2. Remove the tail/brake light bulb

socket (together with the bulb) by

turning it counterclockwise.

3. Remove the burnt-out bulb by

pushing it in and turning it counter-

clockwise.

4. Insert a new bulb into the socket,

push it in, and then turn it clock-

wise until it stops.

5. Install the socket (together with the

bulb) by turning it clockwise.

6. Install the passenger seat.

1. Do not touch the glass part of the bulb.

1. Headlight coupler

2. Headlight bulb cover

2

1

1. Headlight bulb

2. Headlight bulb holder

2

1

1. Tail/brake light bulb socket

1

U42PE2E0.book Page 37 Thursday, December 6, 2012 8:54 AM