Service manual

ELECTRIC STARTER
5-42
7. Check:
• Gear teeth
Damage/wear → Replace the gear.
EAS24800
ASSEMBLING THE STARTER MOTOR
1. Install:
• Brush seat “1”
NOTE:
Align the tab “a” on the brush seat with the tab
“b” in the starter motor rear cover.
2. Install:
• Armature “1”
3. Install:
• Starter motor yoke “1”
• O-rings “2”
• Starter motor rear cover “3”
• Starter motor assembling bolts
NOTE:
Align the match marks “a” on the starter motor
yoke with the match marks “b” on the front and
starter motor rear covers.
EAS24810
INSTALLING THE STARTER MOTOR
1. Install:
• Starter motor “1”
• Starter motor bolts “2”
2. Connect:
• Starter motor lead “3”
Starter motor assembling bolt
5 Nm (0.5 m·kg, 3.6 ft·lb)
Starter motor bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)