Service manual

CLUTCH
5-51
• Lock the threads on the clutch boss nut by
staking them with a drift punch at the point
aligned with the groove in the axle.
• While holding the clutch boss assembly “1”
with the clutch holding tool “3”, tighten the
clutch boss nut.
6. Lubricate
• Friction plates
• Clutch plates
(with the recommended lubricant)
7. Install:
• Friction plate 2
• Clutch plate 1 “1”
8. Install:
• Friction plate 1 “1”
NOTE:
Install the last friction plate shifting half phase.
9. Install:
• Bearing
• Pull rod “1”
• Pressure plate “2”
•Clutch springs
• Clutch spring bolts “3”
NOTE:
Tighten the clutch spring bolts in stages and in
a crisscross pattern.
Universal clutch holder
90890-04056
YM-91042
Recommended lubricant
Engine oil
Clutch spring bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)