Service manual

GENERAL SPECIFICATIONS
2-1
EAS20280
GENERAL SPECIFICATIONS
Model
Model 3C34 (U.S.A.)
3C35 (California)
Dimensions
Overall length 2140 mm (84.3 in)
Overall width 770 mm (30.3 in)
Overall height 1205 mm (47.4 in)
Seat height 815 mm (32.1 in)
Wheelbase 1460 mm (57.5 in)
Ground clearance 135 mm (5.31 in)
Minimum turning radius 3000 mm (118.1 in)
Weight
With oil and fuel 220.0 kg (485 lb) (U.S.A.)
221.0 kg (487 lb) (California)
Maximum load 190 kg (419 lb) (U.S.A.)
189.0 kg (417 lb) (California)
EAS20290
ENGINE SPECIFICATIONS
Engine
Engine type Liquid cooled 4-stroke, DOHC
Displacement 998.0 cm³ (60.90 cu.in)
Cylinder arrangement Forward-inclined parallel 4-cylinder
Bore × stroke 77.0 × 53.6 mm (3.03 × 2.11 in)
Compression ratio 11.50 : 1
Standard compression pressure (at sea level) 1480 kPa/350 r/min (210.5 psi/350 r/min) (14.8
kgf/cm²/350 r/min)
Starting system Electric starter
Fuel
Recommended fuel Unleaded gasoline only
Fuel tank capacity 18.0 L (4.76 US gal) (3.96 Imp.gal)
Fuel reserve amount 3.4 L (0.90 US gal) (0.75 Imp.gal)
Engine oil
Lubrication system Wet sump
Type YAMALUBE 4 , SAE10W30 or SAE20W40
Recommended engine oil grade API service SE, SF, SG type or higher
Engine oil quantity
Total amount 3.80 L (4.02 US qt) (3.34 Imp.qt)
Without oil filter cartridge replacement 2.90 L (3.07 US qt) (2.55 Imp.qt)
With oil filter cartridge replacement 3.10 L (3.28 US qt) (2.73 Imp.qt)
Oil filter
Oil filter type Paper
Oil pump
Oil pump type Trochoid
Inner-rotor-to-outer-rotor-tip clearance 0.010–0.100 mm (0.0004–0.0039 in)
Limit 0.18 mm (0.0071 in)
Outer-rotor-to-oil-pump-housing clearance 0.090–0.150 mm (0.0035–0.0059 in)
Limit 0.22 mm (0.0087 in)
Oil-pump-housing-to-inner-and-outer-rotor
clearance 0.06–0.13 mm (0.0024–0.0051 in)