Service manual

LIGHTING SYSTEM
8-17
EAS27260
TROUBLESHOOTING
Any of the following fail to light: headlight, high beam indicator light, taillight, license light or meter
light.
NOTE:
• Before troubleshooting, remove the following part(s):
1 Rider and passenger seat
2 Fuel tank
3 Air filter case
NG→
OK↓
NG→
OK↓
NG→
OK↓
NG→
OK↓
NG→
OK↓
NG→
OK↓
NG→
OK↓
1 Check the each bulbs and bulb
sockets condition.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page 8-
84.
Replace the bulb(s) and bulb
socket(s).
2 Check the fuses.
(Main, and headlight)
Refer to "CHECKING THE FUSES"
on page 8-85.
Replace the fuse(s).
3 Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-85.
• Clean the battery terminals.
• Recharge or replace the battery.
4 Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-81.
Replace the main switch.
5 Check the dimmer switch.
Refer to "CHECKING THE
SWITCHES" on page 8-81.
The dimmer switch is faulty. Replace
the left handlebar switch.
6 Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-81.
The rear brake light switch is faulty.
Replace the rear brake light switch.
7 Check the headlight relay (on/off).
Refer to "CHECKING THE
RELAYS" on page 8-88.
Replace the headlight relay.