User Manual

44
Details on Each Function Setup Item
Using Various Functions
Chapter
7
■ Metronome Volume
You can adjust the volume of the metronome.
Setting range
1 to 20
Default setting
15
■ Single Repeat
You can play back the currently selected song
repeatedly.
Setting range
On, Off
Default setting
Off
Note
This setting is deactivated during random playback or all
playback.
■ Song Balance
You can adjust the volume balance between keyboard
playing and song playback (MIDI and audio). Increase
the value to reduce the volume of keyboard playing.
Decrease the value to reduce the volume of song
playback.
Setting range
–64 to 64
Default setting
0
Note
•The original volume balance is set for some PianoSoft
songs. During the playback of such songs, priority is given
to their original volume balance.
•The piano sound of PianoSoft songs (including the
demonstration and preset songs on the unit) is recognized
as keyboard playing. Therefore, increasing this value
reduces the volume of the piano sound.
•This setting does not revert to its default setting when you
turn the unit off.
■ Song Transpose
You can transpose the pitch of song playback (MIDI
and audio) or sound input through the AUX IN jack.
Transposition can be set in semitone increments. For
example, if you set the transposition amount to 5,
playing C3 key produces pitch F3.
Setting range
–12 to 12
Default setting
0
■ Audio Tuning
You can fine tune the pitch of audio song playback
or sound input through the AUX IN jack in 1 cent
increments.
Setting range
–50 to 50 (cent)
Default setting
0 (cent)
Note
100 cents is equal to one semitone.
■ Damper Resonance Depth
You can set the depth of the Damper Resonance effect,
which is applied when you press the damper pedal.
This setting is effective for the Piano voice.
Setting range
0 to 10
Default setting
5
Note
•The Damper Resonance does not work in the TA mode.
•This setting does not revert to its default setting when you
turn the unit off.