User Manual

Creating Your Own Original Voices
16
 Effect
 EQ
This completes the procedure for Step 4 on page 13. You should now proceed to Step 5.
Filter Harmonic
Cont.
Determines the emphasis given to the cutoff frequency (resonance), set in Filter Brightness
above (see diagram). Higher values result in a more pronounced effect.
AEG Attack Determines how quickly the sound reaches its maximum level after the key is played.
The lower the value, the quicker the attack.
AEG Decay Determines how quickly the sound reaches its sustain level (a slightly lower level than maxi-
mum). The lower the value, the quicker the decay.
AEG Release Determines how quickly the sound decays to silence after the key is released. The lower the
value, the quicker the decay.
Vibrato Depth Determines the intensity of the Vibrato effect. Higher settings result in a more pronounced
Vibrato.
Vibrato Speed Determines the speed of the Vibrato effect.
Vibrato Delay Determines the amount of time that elapses between the playing of a key and the start of the
Vibrato effect. Higher settings increase the delay of the Vibrato onset.
Reverb Depth Adjusts the reverb depth.
Chorus Depth Adjusts the chorus depth.
Insertion Effect On/
Off
Determines whether the Insertion Effect is on or off.
Insertion Effect Cate-
gory
Selects the Insertion Effect category.
Insertion Effect Type Selects the Insertion Effect type. Select a type after selecting a category.
Insertion Effect
Depth
Adjusts the Insertion Effect depth.
Low Frequency Sets the frequency of the equalizer’s low-frequency band.
Low Gain Sets the volume boost for the equalizer’s low-frequency band.
High Frequency Sets the frequency of the equalizer’s high-frequency band.
High Gain Sets the volume boost for the equalizer’s high-frequency band.
Volume
Resonance
Frequency (pitch)