User Manual

5
MEGAEnhancer Owner’s Manual
Main window
q Menu Bar
See page 6 for details.
w Voice Conversion List by Channel
The Before columns indicate the name/number of the current Voices for each channel, while the After column indicates the
corresponding MegaVoice to which the Voice is to be converted. The MegaVoice can be set for each channel on After col-
umns as desired. It is also possible to disable conversion to MegaVoices as desired. In that case, After columns are displayed
in gray. When a song file (SMF) is opened, recommended MegaVoices by MEGAEnhancer are displayed as default on After
columns.
e Convert
Click this button to start the data conversion according to the settings in the Voice Conversion List and the specified Beat
Resolution.
r Exit
Quits this application.
t Beat Resolution
Sets a standard note value used for the conversion. When a song file (SMF) is opened, a recommended note value by
MEGAEnhancer is displayed automatically. If a conversion result with the recommended value is not as expected or desired,
change the note value and try converting again.
HINT
Generally, you should set the Beat Resolution to the denominator value of the song meter: i.e., q (quarter note when the song meter is
4/4) or e (eighth note when the song meter is 6/8). However, the most appropriate setting is variable by the particular MIDI data of each
song file.
For example, setting the Beat Resolution to e
3
(eighth note triplet) may produce good results if the song data has notes programmed
with a triplet feel over a meter of 4/4.
w
q
t
r
e