User Manual

Genos Reference Manual 45
2
Voices
Creating and Using a Temperament Temporarily (Sub Scale)
You can change the scale temporarily by using the Sub Scale setting. This setting, when being edited, takes priority
over the Main Scale setting. The setting is effective only while the Sub Scale is enabled (e.g., “Sub” is selected on the
Scale Tune display).
1 On the Scale Tune display, touch [Sub] to select the Sub Scale setting.
The Sub Scale setting is applied to checkmarked parts on bottom of the display.
Even if the Sub Scale is selected, the Main Scale setting is applied to the parts which are not checkmarked on bot-
tom of the Sub Scale display but checkmarked on the Main Scale display.
2 Change the following settings.
If you return to the home display in this condition, the Sub Scale setting remains enabled.
3 To stop using the Sub Scale setting, touch [Main] on the Scale Tune display.
The Sub Scale setting is disabled, and all the Sub Scale tune settings are reset to their default values.
Tune Touching the boxes at the upper and lower side of the keyboard illustration lets you easily lower the
pitches of the desired note by 50 cents. Turning the boxes on/off lets you determine whether the tune set-
ting is applied to the note or not.
You can adjust the tune value by touching the desired key illustration and tune it in cents.
Bypass Turning this on disables all the Scale Tune settings temporarily. This lets you hear the sound for compar-
ison purposes.
Parts Checkmark the part to which the Sub Scale setting is applied.
The Sub Scale setting is also disabled and reset to default when the power of instrument is turned off.
You can enable/disable the Sub Scale setting and make the Sub Scale setting quickly, using the function “Scale Tune Quick Setting,” which can be assigned to the assign-
able buttons or foot pedals. For details, see page 138.
2
1
Parts to which the Sub Scale set-
ting are applied
NOTE
NOTE