User Manual

9
Exporting the Project to an Audio Style File
1. Click “File  Open Audio Style Project.”
2. Select the desired project file.
3. Click “File  Export as the Style File” to Export the project.
4. Enter the desired Style file name, then click the [Save] button.
The export process is executed, and then a message will be shown when finished.
How to install an exported Audio Style file (.aus) to the instrument
There are two ways to install and play the exported Audio Style on your instrument.
(a) Import the data Yamaha Expansion Manager, and install it on the instrument as original Expansion Pack data.
(b) Save the Audio Style file (.aus) directly to a USB flash drive and connect the USB flash drive to the instrument.
Method (a) is available for an instrument supported by Yamaha Expansion Manager and can be used with models
compatible with Audio Style. To determine whether if your instrument is compatible or not with Audio Style, refer
to the manuals of the instrument itself.
Method (b) is available only with Genos firmware version 1.20 or later, as of April 2018.