Service manual

2-9
SPEC
E
TIGHTENING TORQUES
Handlebar switch assembly –
handlebar
Screw M5 2 3 0.3 2.2
QSTS grip assembly – handlebar Screw M6 1 3 0.3 2.2
Grip end – handlebar Bolt M5 2 1 0.1 0.7
Choke lever assembly –
handlebar
Screw M5 2 3 0.3 2.2
QSTS cable housing – cover Screw M4 1 1 0.1 0.7
Plate/steering column assembly
– deck
Nut M8 2 16 1.6 11
Steering column assembly – deck Nut M8 2 16 1.6 11
Steering arm – steering column Nut M8 1 16 1.6 11
Steering cable ball joint –
steering arm
Nut M6 1 5 0.5 3.6
Handlebar stopper – steering
column housing
Nut M10 1 26 2.6 19
QSTS cable locknut
(nozzle ring side)
Nut M5 1 3 0.3 2.2
QSTS cable – hull Nut — 1 6 0.6 4.3
QSTS cable end – pin – QSTS
converter
Nut M6 1 4 0.4 2.9
Steering cable locknut
(nozzle deflector side)
Nut M6 1 6 0.6 4.3
Steering cable – hull Nut — 1 6 0.6 4.3
Steering cable holder – bracket Bolt M6 1 6 0.6 4.3
Speed sensor lead – hull Nut — 1 6 0.6 4.3
Hinge assembly – front hood Bolt M6 2 12 1.2 8.7
Wind shield – front hood Screw M5 8 1 0.1 0.7
Hood lock – front hood Bolt M6 2 5 0.5 3.6
Hinge assembly – deck Nut M8 2 16 1.6 11
Steering console cover assembly
– deck
Nut M6 2 5 0.5 3.6
Bolt M6 4 3 0.3 2.2
Screw M5 2 2 0.2 1.4
Nut M8 2 16 1.6 11
Multifunction meter – holder Nut M5 2 2 0.2 1.4
Steering console cover – side
cover
Screw M6 4 3 0.3 2.2
Steering console cover – glove
compartment
Screw M5 4 1 0.1 0.7
Steering cable bracket – deck Bolt M6 1 6 0.6 4.3
Buzzer bracket – deck – steering
cable bracket
Bolt M6 2 6 0.6 4.3
Hood lock assembly – deck Nut M6 2 6 0.6 4.3
Seat lock assembly – seat Bolt M6 2 6 0.6 4.3
572
LT
Bracket/deck – notch Nut M10 1 26 2.6 19
Bracket/deck – hand grip Bolt M8 2 5 0.5 3.6
Part to tightened Part name
Thread
size
Q’ty
Tightening torque
Remarks
N•m kgf•m ft•lb