User Manual

Assembling the Clavinova
130
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
9. If desired, you can attach the AC
adaptor to the bottom of the unit by
using the adaptor holders.
For specific instructions, refer to the leaflet
enclosed with the adaptor holders.
CAUTION
To disassemble the unit, reverse the assembly sequence.
Failure to do so can result in damage to the instrument or
personal injury. In particular, if you lay down the main unit
without detaching the pedal box, the pedals will break.
Remove all parts from the package and make sure
you have all of the items.
AC adaptor
4 × 10 mm
thin screws
CLP-765GP Assembly
Legs Pedal box
6 × 40 mm fixing screws × 12
Cord holder
6 × 20 mm fixing screws × 4
Power cord
Bundled pedal cord inside.
The pedals are covered with
vinyl covers when shipped from
the factory. Before starting the
assembly, please make sure to
remove the cover from the
damper pedal.
Connector panel
Main unit
To prevent damage to the connector panels located at the bottom of main
unit, make sure to place main unit on the Styrofoam pads. Also, make sure
that the pads do not touch the connector panels.
Headphone hanger
4 × 10 mm thin screws × 2
AC adaptor
4 × 10 mm thin screws × 4
Adaptor holders
Pads
The power cord and AC adaptor may not be included, or may look different
from the illustration above, depending on your particular area. Please check
with your Yamaha dealer.