User Manual
Table Of Contents
- PRECAUTIONS
- Main Features
- Included Accessories
- About the Manuals
- Using the PSR-SX900/SX700—A Broad Overview
- Contents
- Key Functions and Terms
- Panel Controls and Terminals
- Starting Up
- Display Structure
- Basic Operations
- Workflow Guide—For Performing on the PSR-SX900/SX700
- Playing with Styles—Setting Up
- Setting up Styles
- Optimum Panel Settings for the Current Style (One Touch Setting)
- Setting up Keyboard Parts
- Selecting a Voice for Each Keyboard Part
- Creating Original Organ Flutes Voices
- Setting up Keyboard Harmony/Arpeggio
- Setting up Multi Pads
- Memorizing Original Panel Settings to One Touch Setting
- Changing the Pitch of the Keyboard
- Setting up Assignable Controllers
- Playing with Styles—Operations While Performing
- Singing with Song Playback—Setting Up
- Singing with Song Playback—Operations While Performing
- Adjusting the Parameters of Each Part— Mixer
- Song Recording
- Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
- Customizing for Optimum Performance
- System Settings
- Connections—Using Your Instrument with Other Devices
- Connecting a Microphone or Guitar ([MIC/GUITAR INPUT] jack)
- Using an External Speaker System for Playback (MAIN OUTPUT jacks, SUB (AUX) OUTPUT jacks (PSR-SX900))
- Listening to Audio Playback by the External Device through the Instrument’s Speaker
- Connecting Footswitches/Foot Controllers (FOOT PEDAL jacks)
- Connecting USB Devices ([USB TO DEVICE] terminal)
- Connecting to an iPhone/iPad ([USB TO DEVICE], [USB TO HOST], or MIDI terminals)
- Viewing the Instrument’s Display on an External Monitor (PSR-SX900)
- Connecting to a Computer ([USB TO HOST] terminal)
- Connecting External MIDI Devices (MIDI terminals)
- Function List
- Appendix
- Index
PSR-SX900/SX700 Owner’s Manual 101
Connections—Using Your Instrument with Other Devices
3 Connect the microphone or guitar to the [MIC/GUITAR INPUT]
jack.
4 Turn on the power of the instrument.
Adjusting the input level of the microphone or guitar
1 If necessary, turn on the microphone.
2 Call up the Mic Setting display via [MENU] [Mic Setting].
3 Adjust the [GAIN] knob on the rear panel while singing into the
microphone or playing the guitar.
Adjust the [GAIN] knob so that the input level meter on the display lights in green
or yellow. Make sure that the meter does not light in orange or red, since this indi-
cates that the input level is too high.
4 Adjust the volume balance between the microphone or guitar
sound and the instrument sound on the Mixer display (page 80).
Disconnecting the microphone or guitar
1 Set the [GAIN] knob on the rear panel to the minimum position.
2 Disconnect the microphone or guitar from the [MIC/GUITAR
INPUT] jack.
The Mic Setting display can also be
called up by pressing the [MIC SET-
TING/VOCAL HARMONY] (PSR-
SX900) or [MIC SETTING] (PSR-
SX700) button.
NOTE
Input level meter
You can also check the input level on
the SIGNAL lamp on the [MIC SET-
TING/VOCAL HARMONY] (PSR-
SX900) or [MIC SETTING] (PSR-
SX700) button. Make sure that the lamp
does not light in orange.
NOTE