User Manual

Setup Procedures

DTX700

2-2. Storing Pad Types

Store your pad type settings on the drum trigger module to ensure they are not lost.

1. Press the [STORE] button.

You can press the [EXIT] button to return to the previous page without storing.

2. Press the [ENTER] button to store the settings.

2-3. Selecting a Voice

Select the voice(s) you wish to play for each input jack (instrument).

1. Press the [INST] button.

2. Strike the head or rim whose instrument voice(s) you wish to change.

This will change the displayed trigger input jack.

3. Select a voice for your newly-added drum trigger.

2-4. Storing Voices

Store your voice settings on the drum trigger module to ensure they are not lost. Follow the steps indicated in “2-2. Storing Pad

Types”.

This completes the setup process.

You can now use your drum triggers to experience a whole new world of drumming.

Notice

Never attempt to turn off the drum trigger module while the message “Please keep power on” is shown. If this precaution is not

observed, user data may be lost or the internal system may be damaged, rendering your drum trigger module unable to startup nor-

mally when it is next turned on.

NOTE

If you have connected a DT50S to the [oKICK/!0] jack, “Kick” will be displayed when you strike the head, and “Pad10” will be displayed when

you strike the rim.

NOTE

If you wish to assign a voice to the rim, navigate to the Menu area’s Kit/Voice page and make the necessary settings.

Name of trigger input jack