User Manual

2
DTX502
Depending on the version of the firmware, you may need to update it. Before you connect the module
to your DT50S/DT50K triggers, be sure to check the version of your module’s firmware.
1. While holding down the [SHIFT] button, turn on the drum trigger module.
2. Confirm the version displayed on-screen.
After you confirm the version, select the appropriate setup method.
If Version 1.30 or later
Quick Setup (recommended)
Advanced Setup
If Version less than 1.30
Update before Using (recommended)
Use without Updating
Checking the Firmware Version
Selecting a Setup Method