User Manual

TIPS!

DTX-MULTI 12

 Connecting Multiple DT50S/DT50K Triggers

The instrument has three input jacks that allow triggers to be connected—[!3], [!4/!5], and [!6/!7]. However, you can

connect up to five DT50S/DT50K triggers (e.g., four DT50S triggers and one DT50K trigger) by using commercially

available Y-cables.

This section describes how to connect five DT50S/DT50K triggers (four DT50S triggers and one DT50K trigger) as an

example.

Adding triggers is a great way to expand your performance options by playing voices, waves, and patterns; assigning func-

tions to the triggers; and so on.

If setting up your instrument with the above connections, refer to the table below for settings. See “Setup Procedures” for

details on setting parameters.

LR LR

To m1 (DT50S)

Tom 2 (DT50S)

Floor tom (DT50S)

Bass drum (DT50K)

stereo audio cables that

came with DT50S/DT50K

commercially available Y-cables

Snare drum

(DT50S)

*: These voices are presented as examples only. Feel free to change them to suit your personal preferences.

Acoustic drum on which

the trigger is mounted

Input jack on drum

trigger module

Settings for pad type Settings for Voice

Name of trigger

Pad type

Name of trigger

Voice *

DT50S

Snare

[!4/!5][!4] DT50S(S)SN [!4]Sn001: OakCustom

To m 1 [!4/!5][!5] DT50S(S)HTm [!5] Tm001: OakCtm H

To m 2 [!6/!7][!6] DT50S(S)HTm [!6] Tm002: OakCtm M

Floor tom [!6/!7][!7] DT50S(S)LTm [!7] Tm003: OakCtm L

DT50K Bass drum [!3][!3]DT50K[!3]Kk001: OakCustom

Manual Development Group

Published 07/2016 PO-A0

Yamaha Global Site

http://www.yamaha.com/

Yamaha Downloads

http://download.yamaha.com/