User Manual
Table Of Contents
12
To prevent unnecessary power consumption, the instrument is equipped with an Auto
Power O Function that automatically switches the power o if the instrument has not been
played for more than 30 minutes. If the Auto Power O function switches the instrument’s
power OFF, simply press the power switch again to continue using the instrument.
* The Auto Power OFF function is enabled when shipped from the factory.
l
Conrming the Auto Power O Function’s Enabled/Disabled Status
• When the Auto Power O Function is enabled, the instrument will directly enter the Play mode (LEDs
do not ash) when switching the power ON (press the power switch or connect a cable to the LINE
OUT jack).
• When the Auto Power O Function is disabled all Tuner LEDs will light then go out one by one
before entering the Play Mode when switching ON the power.
l
Changing the Auto Power O Function Enabled/Disabled Setting
With the power switched ON (Play Mode), press and hold the TUNER switch for more than two sec-
onds to enable the function.
• Performing the operation described above when the function is enabled will cause all tuner LEDs to
light and then turn o one by one and disable the function.
• Performing the operation described above when the function is disabled will cause the tuner LEDs
to light one by one and enable the function.
About the Auto Power O Function
Play Mode
Lights
Play Mode
Play Mode
Play Mode
Auto Power O
Function disabled
Auto Power O
Function enabled