User Manual

19
Making adjustments

Adjusting the stylus pressure
Adjustthetonearmsothattheappropriatestyluspressure
will be applied to the record.
1
Remove the tonearm from the arm
rest and move it slightly towards the
record.
NOTICE
Takecarethatthestylusdoesnotcontactany
part of the unit.
2
Turn the counter weight so that the
tonearm will be horizontal.
1
2
Toward
1
: Counter weight moves forward
on the tonearm.
Toward
2
: Counter weight moves backward
on the tonearm.
3
Return the tonearm to the arm rest.
4
Turn the VTF dial so that the “0”
marking will be aligned with the center
line on the back end of the tonearm.
Center line
Note
WhenturningtheVTFdial,useyourngersto
hold the counter weight in place so that it will not
rotate.
5
Turn the counter weight to set the VTF
dial markings to the stylus pressure
specied for the cartridge.
Note
• TurningthecounterweightalsoturnstheVTF
dial.
• Use a stylus pressure gauge to set an accurate
stylus pressure.