User Manual
Table Of Contents
22
Playing a record
Starting the record
CAUTION
If you start to play a record without rst suciently
lowering the volume of your amplier, a loud sound
might occur when the tip of the stylus contacts the
record. This could in some cases cause hearing loss
and might damage your amplier and speakers, so be
sure to lower the volume of your amplier rst.
NOTICE
Be sure to use this product at an allowable operating
temperature (10 °C–35 °C [50 °F–95 °F]). Otherwise,
uneven rotation may occur, or the record or the tip of
stylus may get damaged, in particular under cooler
temperatures below 10 ℃ (50 °F).
This product is equipped with a relatively low-torque
motor to achieve stable playback by suppressing
torque uctuation during rotation. If the grease
viscosity of the center spindle increases and thickens
under cooler temperatures, the rotational load of the
turntable also increases, and may force the motor to
exceed its performance limits. If this happens, the
selected rotation speed may not be achieved or an
uneven rotation may occur.
1
Place the record on the platter.
If you are playing a 45 rpm record, use the 45 rpm
adaptor.
2
Press the speed button repeatedly
to select the rotation speed that is
appropriate for the record.
The speed indicator for the selected speed will
light up.
3
Press the START/STOP button.
The platter starts to rotate.
The speed indicator will be ashing until the
selected speed is reached.