User Manual

4
NOTICE
Indicates points that you must observe in order
to prevent product failure, damage or
malfunction and data loss.
Installation
• Do not use this unit in the vicinity of other electronic
equipment, such as a TV, radio, or mobile phone.
Failure to observe this may cause this unit or the TV or
radio to produce noise.
• Do not use this unit in a location that is exposed to
direct sunlight that becomes extremely hot, such as
near a heater, or extremely cold, or that is subject to
excessive dust or vibration. Failure to observe this may
cause the unit's panel to become deformed, the
internal components to malfunction, or for operation to
become unstable.
Connections
• If connecting external units, be sure to thoroughly read
the manual for each unit and connect them in
accordance with the instructions.
Failure to properly handle a unit in accordance with the
instructions could cause malfunctions.
Handling
• Do not place plastic or rubber products on this unit.
Failure to observe this may cause discoloration or
deformation in the panel of this unit.
• If the ambient temperature changes drastically (such as
during unit transportation or under rapid heating or
cooling) and there is a chance condensation may have
formed in the unit, leave the unit for several hours
without turning on the power until it is completely dry
before use. Using the unit while there is condensation
can cause malfunctions.
Maintenance
• If the temperature or humidity changes drastically,
water droplets (condensation) may form on the unit
surface. If water droplets form, immediately wipe them
off with a soft cloth. If water droplets are left on the unit,
they may be absorbed into the wooden parts, causing
deformation.
• When cleaning the unit, use a dry, soft cloth. Using
chemicals such as benzine or thinner, cleaning agents,
or chemical scrubbing cloths can cause discoloration
or deformation.
Information
About functions included in the unit
• The illustrations in this manual are for instructional
purposes only.