User Manual

26
Troubleshooting
Iftheunitstopsoperatingcorrectly,checkthefollowingpoints.
Iftakingtheappropriateactiondoesnotsolvetheproblem,orifyouencounteraproblemthatisnotlistedbelow,press
thePOWERbuttonlocatedontheunit’stoppaneltoturnothepower.Thendisconnectthepowercordandcontactyour
nearestauthorizedYamahadealerorservicecenter.
Problem Cause Action
See
page
Pressing the POWER
button does not turn on
the power.
The power plug has been
unpluggedfromthisunit’sAC
INjackorfromtheACoutlet,
oritisnotrmlypluggedin.
Firmlyplugthepowerplugintothis
unit’sACINjackandintoanAC
outlet.
17
The platter does not
rotate.
The belt is not correctly
positioned on the sub platter and
pulley,orthebelthascomeo.
Attachthebeltcorrectlytothesub
platter and the pulley.
15
The POWER button is not on. Turn the POWER button on. 21
No sound.
The head shell is not correctly
attached to the tonearm.
Attachtheheadshelltothetonearm
correctly.
16
The shell lead wires are not
correctly connected to the
cartridge.
Connect the shell lead wires to the
cartridge correctly.
16
The unit is not connected to the
amplierproperly.
Connecttheunittotheamplier
properly.
17,18
Themutesettingoftheamplier
is on.
Turnothemutesettingofthe
amplier.
—
Volume is too weak or
too loud.
The cartridge setting of the
amplierorphonoequalizeris
incorrect.
Set the cartridge setting of the
amplierorphonoequalizercorrectly
for the type of cartridge that you are
using (MM or MC).
—
Something is wrong
with the left/right sound
balance.
The turntable is tilted. Placetheturntableonalevelsurface. —
The pitch of the music
being played sounds
too high or too low.
The speed setting is incorrect.
Set the speed setting correctly. This
unit does not support SP records
(78rpm).
22