User Manual

27
Problem Cause Action
See
page
Hum is audible.
The unit is not connected to the
amplierproperly.
Connecttheunittotheamplier
properly.
17,18
Theheadshellisnotrmly
secured to the tonearm.
Usethelocknuttormlysecurethe
head shell to the tonearm.
16
The cartridge is not correctly
secured to the head shell.
Secure the cartridge to the head shell
correctly.
16
Skips occur.
Noise occurs.
The sound is distorted.
The stylus pressure is not
adjustedcorrectly.
Adjustthestyluspressureproperly. 19
The record is scratched or
warped.
Do not use scratched or warped
records.
—
The record is dirty.
Useacommercially-availablerecord
cleaner to clean the record.
24
The record is statically charged.
Useananti-staticbrushtoremovethe
static charge.
—
The stylus is dirty. Removethedirtfromthestylus. 24
The stylus is worn down. Replace the stylus. —
The unit is placed in a location
thatissubjecttovibration.
Placetheunitonalevelsurfacethat
isnotsubjecttovibration.
—
Feedback occurs.
The unit is too close to the
speakers.
Locate the unit farther away from the
speakers.
—
Thesoundvolumeistoohigh. Adjustthevolumeoftheamplier. —