User Manual

16 DGX-670 Reference Manual
2
Voices
 Effect/EQ page
1 Reverb Depth, Chorus Depth, DSP Depth, Vibe Rotor
2 DSP Type
3 EQ
Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to
page 71.
 Harmony page
From this display, you can set the same parameters as those in the Keyboard Harmony display (step 4 on
page 7). Before making any settings, make sure that the current part is set to Main; in other words, you
should turn on the Main part by pressing the PART ON/OFF [MAIN] button. The settings here are called
up automatically simply by selecting the corresponding Voice.
[1 ]/
[2 ]
Reverb Depth Adjusts the reverb depth. The setting cannot be changed when a VRM
Voice is selected.
[3 ]/
[4 ]
Chorus Depth Adjusts the chorus depth. The setting cannot be changed when a VRM
Voice is selected.
[5 ] DSP On/Off Determines whether the DSP effect is on or off.
[6 ] DSP Depth Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the 2 DSP menu
explained below.
[7 ] Vibe Rotor This will be displayed only if Vibe Rotor is selected for the DSP Type
parameter explained below. Determines whether Vibe Rotor should be set
to on or off when selecting a Voice.
[2 ]/
[3 ]
Category Selects the DSP effect category and type. Select a type after selecting a
category.
[4 ]/
[5 ]
Type
[6 ] Detail Calls up a detailed setting display.
In the detailed setting display, select the desired parameter by using the
[2 ] – [4 ] buttons, and then adjust the value by using the
[5 ] / [6 ] buttons. This differs depending on the effect type and
cannot be changed. Press the [EXIT] button to close the setting display.