User Manual

ManualsBrandsYamaha ManualsMusical InstrumentsGX-670

38 DGX-670 Reference Manual

Styles

3 Use the [3 ]–[7 ] buttons to edit the data.

For details on editable parameters, see below.

NOTICE

The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation

(step 8 on page 27).

1 Source Root/Chord (Play Root/Chord)

IMPORTANT

The parameters here should be set before recording. If you change the settings after recording, the appropriate note conversion cannot

be done even when you specify various chord types.

Before recording, you should set these parameters which determine what key is used for playing when you

record the Source Pattern to the Bass, Chord, Pad or Phrase channel. If you set this to “Fm7,” your

recorded original phrase (Source Pattern) will be triggered by specifying Fm7 during normal performance.

CM7 (Source Chord Root = C and Source Chord Type = M7) is set by default. Depending on the settings

here, the playable notes (chord notes and recommended scale notes) will differ. For details, see below.

NOTE When the parameters for the selected channel are set to NTR: Fixed, NTT: Bypass, and Bass: Off, the parameters here are changed to Play Root instead of

Source Root. In this case, you can hear the resulting sound while you change the Chord Root/Type during playback.

NOTE The settings here are not applied when NTR is set to Gtr.

2 NTR/NTT

The settings here determine how the original notes of the Source Pattern are converted in response to the

Chord change during normal performance.

NOTE Since the Rhythm channels should not be affected by chord changes, make sure that the parameters are set to NTR: Fixed, NTT: Bypass, and Bass: Off. In

this case, Source Root is changed to Play Root.

[3 ] NTR (Note Trans-

position Rule)

Determines the relative position of the root note in the chord, when converted

from the Source Pattern in response to chord changes. Refer to the list below.

[4 ]–

[6 ]

NTT (Note Trans-

position Table)

Sets the note transposition table for the source pattern. Refer to the list below.

[7 ] Bass The channel for which this is set to On will be played back by the bass root

note, when the on-bass chord is recognized by the instrument. When NTR is

set to Gtr and this parameter is set to On, only the note which is assigned to

bass will be played back by the bass root note.

When the Source Root is C:

C = Chord notes

C, R = Recommended notes