User Manual

50 DGX-670 Reference Manual
4
Songs
2 Quick Start, Phrase Mark Repeat
 Setting page
1 Part Channel, Guide Mode
2 Lyrics Language
Keyboard and Vocal Practice Using the Guide Function
With the Guide function, the instrument indicates the timing you need to play notes in the Score display for
ease in learning. This instrument also features convenient vocal practice tools that let you adjust the timing of
Song playback to match your vocal performance.
1 Select the desired Song, and then call up the Score display.
[7 ]/
[8 ]
Chord Detection
Priority
Determines the priority of the chords for accompaniment, either the ones
contained in the Song being played back or the chord you’ve just played
in the chord section of the keyboard.
• MIDI Song: Gives priority to the chords contained in the Song.
• Keyboard: Gives priority to the chords you play in the chord section of
the keyboard. Set this if you want to practice playing chords with Song
playback. Once you play in the chord section during Song playback, the
instrument ignores the chords contained in the Song until the playback
ends.
[3 ]/
[4 ]
Quick Start On some commercially available Song data, certain settings related to the
Song (such as Voice selection, volume, etc.) are recorded to the first mea-
sure, before the actual note data. When Quick Start is set to On, the
instrument reads all initial non-note data of the Song at the highest possi-
ble speed, then automatically slows down to the appropriate tempo at the
first note. This allows you to start playback as quickly as possible, with a
minimum pause for reading of data.
[5 ]/
[6 ]
Phrase Mark
Repeat
Phrase Mark is a pre-programmed part of some Song data, which specifies
a certain location (set of measures) in the Song. When this is On, the sec-
tion corresponding to the specified Phrase Mark number is repeatedly
played back. This parameter is available only when the Song containing
Phrase Mark settings is selected.
[2 ] Part Channel • Left, Right: These parameters determine which MIDI channel in the
Song data is assigned to the left- or right-hand part of the Guide func-
tion and the Song Score function. For the channel specified here, “L” or
“R” is shown in the Channel On/Off (Song) display.
[3 ]
[4 ]•Auto Ch Set: When set to On, this automatically sets the proper MIDI
channels for the Right- and Left hand parts pre-programmed in the com-
mercially available Song data. Normally, this should be set to On.
[6 ]/
[7 ]
Guide Mode See the Guide Function explained below.
[4 ]/
[5 ]
Lyrics Language Determines the language displayed in the Lyrics display.
• Auto: When the language is specified in the Song data, the lyrics are
displayed accordingly.
• International: Handles the displayed lyrics as a western language.
• Japanese: Handles the displayed lyrics as Japanese.