User Manual

66 DGX-670 Reference Manual

Mixer

Contents

Editing Volume/Pan Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Editing Filter Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Editing Effect Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

• Adjusting the Effect Depth for Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

• Selecting an Effect Type for each Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

• Editing and Saving Your Original Effect Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Editing EQ/Master EQ (Equalizer) Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

• Editing Part EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

• Editing Master EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Editing Compressor (Master Compressor) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Regarding the Mixer, the Reference Manual covers detailed descriptions of each parameter while the Owner’s

Manual covers the basic instructions. After making settings described in this chapter, make sure to save the

Mixer settings by following the instructions in the Owner's Manual.

Select the part to be edited by pressing the [MIXER/EQ] button repeatedly, and then select the page for the rel-

evant parameters by using the TAB [E][F] buttons.

For a visual indication of the signal flow and configuration of the Mixer, refer to the Block Diagram on page 74.

Move the Cursor on the display by using the Cursor buttons [][][E][F], and then use the Data dial or

the [1 ]–[8 ] buttons to edit parameters.

Editing Volume/Pan Parameters

Pressing the [MIXER/EQ]

button repeatedly selects

the part to be edited.

Voice, etc.