User Manual

DGX-670 Reference Manual 69
8
Mixer
Selecting an Effect Type for each Block
1 In the Effect page, press the [ENTER] button to call up the Type Select display.
2 Use the [1 ]/[2 ] (Block) buttons to select the Effect Block.
3 Use the [3 ] (Part) buttons to select the Part to which you want to apply the effect.
Note that a Part cannot be selected if Reverb, Chorus, or DSP1 (when the Connection parameter is set to
System in step 2 on page 70) is selected. This is because only one of the Effect Types can be selected to be
commonly applied to all available Parts.
4 Use the [4 ]/[5 ] (Category) buttons to select the Effect Category, and then use
the [6 ]/[7 ] (Type) buttons to select the Effect Type.
Note that the Reverb Block is not divided into any Categories.
If you want to edit detailed Parameters of the selected Effect Type, press one of the [8 ] (Detail)
buttons. For details, refer to the next section.
Effect
Block
Effect-applicable
parts
Effect characteristics
Reverb All parts Recreates the warm ambience of playing in a concert hall or jazz club.
Chorus All parts Produces a richly textured sound as if several parts are being played
simultaneously. In addition, other type effects (such as reverb, delay,
etc.) can also be selected in this effect block.
DSP1 Style part,
Song channel 1–16
In addition to Reverb and Chorus, a wide variety of Effect Types are
provided, such as Distortion. This effect is applied only to Style/Song
parts. When the Connection parameter selected in step 2 of page 70 is
set to System, the DSP1 effect will be applied overall to the Style and
Song. When it is set to Insertion, the DSP1 effect will be applied to a
specific part of the Style or Song.
DSP2,
DSP3,
DSP4,
DSP5
Main, Layer Left,
Song channel 1–16,
Mic*
In addition to Reverb and Chorus, a wide variety of Effect Types are
provided, such as Distortion. For each of DSP2–5, you can select one of
the Parts or Channels listed at left. When you select Layer for DSP2, for
example, the DSP2 Effect is applied only to the Layer part. Note that if
you select a Song or Style which needs the DSP2–5 Blocks, the Part
assignment of these three Blocks will be changed automatically with
last priority according to the data.
* The Mic part can only be processed with DSP5. If you want to apply a certain
Effect only to the microphone sound, use DSP5 and select Mic.
2 34
[ENTER]