User Manual

70 DGX-670 Reference Manual

Mixer

Editing and Saving Your Original Effect Type

1 Once you’ve selected an Effect Block and Effect Type in the previous section, use the

[8 ] (Detail) buttons to call up the display for editing the effect parameters.

2 Use the [2 ]–[4 ] (Parameter) buttons to select a parameter, and then use the

[5 ]/[6 ] (Value) buttons to edit the value.

When Reverb, Chorus, or DSP1 is selected as the Effect Block, you can adjust the Return Level via the

[7 ] (Effect Return Level) buttons.

3 Press one of the [8 ] (Save) buttons to call up the User Effect display for the Save

operation.

4 Use the [2 ]–[5 ] (Memory) buttons to select the destination for saving the

settings as a User Effect.

If necessary, change the User Effect name. Press one of the [6 ] (Rename) buttons to call up the

Character Entry window, enter the name, and then press the [8 ] (OK) button.

5 Press the [8 ] (OK) button to carry out the Save operation.

To return to the previous display, press the [EXIT] button.

To call up the User Effect saved here, select the User category of the corresponding Effect Block in step 4

on page 69.