User Manual
DGX-670 Reference Manual 79
9
Connections
In this section, you can make MIDI-related settings for the instrument. This instrument gives you a set of ten
pre-programmed templates that let you instantly and easily reconfigure the instrument to match your
particular MIDI application or external device. Also, you can edit the pre-programmed templates and save up
to ten of your original templates to the User drive.
NOTE You can save all your original templates as a single file to internal memory (User drive) or a USB flash drive. See page 90.
NOTE No MIDI signals are received in the Piano Room.
1 Call up the operation display.
[MENU] → Cursor buttons [][][E][F] MIDI, [ENTER]
2 Select a pre-programmed MIDI template from the Preset page.
For details on pre-programmed templates, see below.
If you have already created your original template and saved it to the User page, you can also select that
template from the User page.
3 To edit the template, press the [8 ] (Edit) button to call up the setting display.
4 Use the TAB [E][F] buttons to call up the relevant page, and then set various
parameters to edit the current MIDI template.
• System....................... MIDI System Settings (page 80)
• Transmit.................... MIDI Transmit Settings (page 82)
• Receive ..................... MIDI Receive Settings (page 83)
• On Bass Note .......... Bass Note Settings for Style Playback via MIDI Receive (page 84)
• Chord Detect ........... Chord Type Settings for Style Playback via MIDI Receive (page 84)
5 When you’ve finished editing, press the [EXIT] button to return to the MIDI Template
Selection display.
6 Press the TAB [F] button to select the User page, and then press the [6 ] (Save)
button to save the MIDI settings as your original MIDI template.
Pre-programmed MIDI Templates
MIDI Settings
All Parts Transmits all parts including the keyboard parts (Main, Layer and Left), with the
exception of Song parts.
KBD & STYLE Basically the same as All Parts with the exception of how keyboard parts are man-
aged. The right-hand parts are handled together as Upper instead of Main and Layer,
and the left-hand part is handled as Lower.
3
[EXIT]
[8 ]