GB DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE 3–DISC CD CHANGER PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E VOLUME DOWN STANDBY UP TIMER PROGRAM B.
Unpacking Déballage Auspacken Uppackning Disimballaggio Desembalaje Uitpakken ● ● ● ● ● ● ● Main unit Appareil principal Gerät Huvudapparat Apparecchio principale Aparato principal Hoofdeenheid ● ● ● ● ● ● ● After unpacking, check that the following parts are contained. Après le déballage, vérifier que les pièces suivantes sont incluses. Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att följande delar finns med.
,,, ,,,,, ,,,, ,,,,, ,,,, ,,, ,,,,, ,,,,,,, Setting this system ● Installation de ce système ● Aufstellen des Systems ● Iordningsställande av denna anläggning ● Installazione del sistema ● Instalación del sistema ● Opstelling van dit systeem ● 20 cm 20 cm 1 cm 1 cm 20 cm 20 cm 20 cm 20 cm 20 cm 20 cm English Set this system allowing enough spaces around and behind the main unit to assure good ventilation.
● Front panel ● Frampanelen ● Voorpaneel ● Panneau avant ● Pannello anteriore M ● Frontseite ● Panel delantero N DISC 1 DISC 2 O DISC 3 P DISC CHANGE OPEN / CLOSE 0, Q 3–DISC CD CHANGER 1 2 PTY SELECT PRESET/ TUNING/ BAND A, R B, S VOLUME 3 4 A/B/C/D/E DOWN STANDBY UP C TIMER 5 D E 6 PROGRAM PHONES BASS B.
Amplifier/tuner Förstärkare/tuner Versterker/tuner 1 Display panel Panneau d’affichage Anzeigefeld Display Quadrante delle indicazioni Visualizador Displaypaneel Amplificateur/tuner Amplificatore/sintonizzatore 3 TIMER 4 STANDBY [p. 12] 5 B. BOOST [p. 34] 6 PROGRAM [p. 10, 37] CD player CD-spelare Compact disc speler M Disc tray Plateau de disque CD-Lade Skivfack Piatto portadischi Plato del disco Disc-lade [p.
Remote control ● Fjärrkontrollen ● Afstandbediening ● Telecommande ● Fernbedienung ● Control remoto ● ● Telecomando 1 2 3 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 A TIME B PROG C R. TIME D EDIT E +I0 MODE REPEAT RANDOM F PRESET TUNER 9 0 DISC SKIP TUNER G H I 5 6 7 TAPE CENTER/ REAR/DELAY TEST PROGRAM DIRECTION BASS BOOST SLEEP 3 3 4 4 6 6 7 7 8 8 9 0 A TIME B PROG C R.
Amplifier/tuner Förstärkare/tuner Versterker/tuner Amplificateur/tuner Amplificatore/sintonizzatore Verstärker/Tuner Amplificador/sintonizador 4 TEST [p. 10] C BASS BOOST 1 Transmission window Fenêtre de transmission Übertragungsfenster Fjärrkontrollsändare Apertura di emissione dei raggi infrarossi Ventanilla de transmisión Signaalvenster [p. 4] E INPUT ( 7 POWER [p. 10] / ) [p. 12, 18, 26, 33] TUNER → TAPE 8 SLEEP [p. 40] ↑ ↓ AUX/MD CD [p. 10, 37] 9 PRESET ( / ↑ ) ↓ VCR ← VIDEO [p.
English Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. Contents Page Page Precautions ................................................. 1 Playing back a tape .................................. 25 Features ...................................................... 3 General information ...............................................
■ To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ■ Choose the installation location of this system carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from sources of hum such as transformers and electric motors.
Precautions: Read this before operating your system CAUTION FOR CARRYING THE MAIN UNIT Be sure not to carry or tip the main unit with discs remaining in it. CAUTION FOR MOVING THE MAIN UNIT Before moving the main unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/ CLOSE button. After you confirm that “NO DISC” lights up on the display, turn this system into the standby mode by pressing the STANDBY/ON switch, and then disconnect the power plug from the AC outlet. For U.
Compact Disc Player General ● 5-Speaker Multichannel Audio System (Two front, One Center and Two Rear Speakers) ● High Power Output Front L, R: 80W + 80W (6Ω) RMS, 0.9% THD, 1 kHz Center: 80W (6Ω) RMS Output Power, 0.9% THD, 1 kHz Rear: 25W (6Ω) RMS Output Power, 0.
Preparations and connections Installing batteries in the remote control 1. Turn the remote control over and remove the battery 1 compartment cover by pulling it up while pressing the edge of the cover in the direction of the mark. 2. Insert the batteries (AA, R6, UM-3 type) according to the polarity markings on the inside of the battery compartment. 3 3. Attach the battery compartment cover. Notes ● Remove the batteries if the remote control is not used for an extended period of time.
English Preparations and connections Setting up the speakers Front L Center m 4 channel 5 speaker configuration Front R This system employs a 5 speaker configuration: 2 front speakers, 2 rear paralleled speakers and a center speaker. The front speakers are used for outputting main source sound. The rear speakers are for effect and surround sounds when PRO LOGIC or HALL is selected. the sound field program The center speaker is for center sounds (dialog etc.
Preparations and connections m Mounting the rear speakers Mount the rear speakers on a shelf, rack or on the floor, or hang them on the wall. 60 mm To mount the rear speakers on the wall by using commercially available speaker stands The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm). They are available for mounting the speaker on a speaker stand. * Those screw holes can be used with M4 screws only.
English Preparations and connections Connections Never plug the AC supply lead of this system into the AC outlet until all connections are completed. Subwoofer system (Separate purchase) Rear speaker Center speaker Rear speaker L R INPUT SPEAKERS SEE OWNER’S MANUAL FOR CONNECTION. REAR R CENTER L REAR SUBWOOFER VIDEO SIGNAL OUT MONITOR OUT R L OUT Front speakers L VCR R CENTER: 6 Ω MIN./SPEAKER REAR: I2 Ω MIN./SPEAKER IN VIDEO OUT MAINS AUX/MD IN R FRONT L 6 Ω MIN.
Preparations and connections m Antenna connection (1) (1) Supplied FM antenna Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the strongest signal can be received. ANTENNA FM GND AM 75Ω UNBAL. (2) Supplied AM loop antenna Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception.
English Preparations and connections Setting the clock 1 While the power is on, press DISPLAY to display the time. DISC 1 DISC 2 DISC 3 DISC CHANGE 2 While holding TIME ADJ pressed, press HOUR and set the OPEN / CLOSE hour. * Press HOUR once to advance the time by 1 hour. Press and hold to advance continuously. 3–DISC CD CHANGER PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E VOLUME DOWN STANDBY UP TIMER 3 While holding TIME ADJ pressed, press MIN and set the PROGRAM BASS PHONES B.
Preparations and connections Speaker balance adjustment You can adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. This is important for the best performance of the built-in Dolby Pro Logic surround decoder. The adjustment of each speaker output level should be done at your listening position with the remote control. Otherwise, the result may not be satisfactory. 1 Turn on the power. 2 Turn down the volume to minimum.
English Compact disc player operation Display information Each indicator mentioned with a number on pages 12–16 corresponds to the indicator with the same number on this page. 1 2 3 TRACK 100 350 1K 3.5K 10K MUSIC TOTAL REM PROGRAM RANDOM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 OVER 15 CD 4 5 6 7 8 S F REP PROG VOLUME 9 0 1 TRACK (track number) 7 Music calendar 2 Time display Track numbers on the currently selected disc will be illuminated (up to the number 15).
Compact disc player operation Basic play 1 Turn on the power. 4 2 Select the CD player by pressing INPUT or until “CD” (2, 4) appears on the display. 3 Press OPEN/CLOSE to open the disc tray. 4 DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE 3, 5 3–DISC CD CHANGER PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E 6, 1 , 2 VOLUME DOWN STANDBY UP 2 TIMER PROGRAM PHONES BASS B.
To select another disc DISC (1, 2, 3) DISC 1 ( DISC 2 DISC 3 DISC CHANGE DISC CHANGE OPEN / CLOSE Pressing DISC (1, 2 or 3) will select the disc directly, and play will begin from track 1 automatically. ) PTY SELECT PRESET/ TUNING/ BAND To select the desired track directly A/B/C/D/E / VOLUME DOWN ( Press DISC SKIP on the remote control once or more (so that the corresponding disc number is located on the top of the disc indicator (3)).
Compact disc player operation Program play DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE You can program up to 20 tracks in any desired order. 1 When the CD player is stopped, press PROG to prepare for PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E 5 VOLUME DOWN UP programming. * “PROG” (9) and “P-01” (2) will light up on the display, and all track numbers on the selected disc (7) will begin flashing. 2 If necessary, select the desired disc by pressing DISC PROGRAM B.
Random play DISC 1 DISC 2 DISC 3 DISC CHANGE Tracks on a selected disc or all discs on the disc tray can be played randomly. OPEN / CLOSE 1 If necessary, switch the disc play mode by pressing PTY SELECT PRESET/ TUNING/ BAND MODE. * If the single disc play mode is selected, select the desired disc by pressing DISC SKIP. A/B/C/D/E VOLUME DOWN UP 2 Press RANDOM to begin random play. * The “RANDOM” indicator (6) will light up. PROGRAM B.
Compact disc player operation Switching the time display Every time TIME is pressed, the display will change as described below. 1 TRACK [Example] When the second track is being played. (Refer to the illustration on the left.) 2 TRACK REM 1 The elapsed play time for the current track will be displayed. 3 TRACK TOTAL 2 The remaining play time for the current track will be displayed. 4 TRACK 3 The total play time of the disc will be displayed.
English Tuning operation Display information Each indicator mentioned with a number on pages 18–24 corresponds to the indicator with the same number on this page. 1 2 PRESET 100 350 1K 3.
Tuning operation Automatic tuning DISC 1 DISC 2 1 Turn on the power. DISC 3 DISC CHANGE OPEN / CLOSE 3 PTY SELECT PRESET/ TUNING/ BAND VOLUME 5, 3 UP or until “TUNER” (2, 8) appears on the display, or simply press TUNER on the remote control. 3 Select the reception band (FM or AM) by pressing A/B/C/D/E DOWN 2 Press INPUT 2 PRESET/TUNING/BAND confirming it on the display (2). * Do not select the preset tuning mode (in which “PRESET” (1) lights up on the display).
Manual preset tuning DISC 1 DISC 2 DISC 3 PTY SELECT DISC CHANGE OPEN / CLOSE PRESET/ TUNING/ BAND A/B/C/D/E 5, 1 VOLUME DOWN UP 6, 2 2 PROGRAM B.BOOST MUSIC INPUT FREQ PS/PTY/RT/CT RANDOM DOLBY NR REC/PAUSE AUTO/MANUAL TIMER 4, 7 The built-in tuner can store station frequencies selected by tuning operation. With this function, you can select any desired station only by calling the corresponding preset station number. Up to 40 stations (8 stations x 5 groups) can be stored.
Tuning operation Automatic preset tuning DISC 1 DISC 2 DISC 3 DISC CHANGE You can make use of an automatic preset tuning function. With this function, the built-in tuner performs automatic tuning. Up to 40 stations are stored automatically. OPEN / CLOSE 1 Turn on the power. PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E 2 Press INPUT VOLUME DOWN UP 2 or until “TUNER” (2, 8) appears on the display, or simply press TUNER on the remote control. 3 Press and hold MEMORY for more than 2 seconds.
Receiving RDS stations RDS (Radio Data System) is a data transmission system employed by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), etc. RDS function is carried out among the network stations.
Tuning operation 1 Frequency 1 Frequency display mode display mode The frequency of the station being received is displayed. 2 PS (Program Service name) mode 2 PS mode 3 PTY mode FREQ PS/PTY/RT/CT RANDOM 4 RT mode The name of the station being received is displayed using characters selected from among 64 Roman Alphabets including umlaut sign. * If other characters are used on the PS data, they are replaced by underbars. * “PS WAIT” may flash while the tuner is receiving the data.
English Tuning operation m Calling a program of your desired program type from among preset RDS stations (PTY SEEK) DISC 1 DISC 2 DISC 3 PTY SELECT DISC CHANGE OPEN / CLOSE PRESET/ TUNING/ BAND By designating a program type, the tuner automatically searches all preset FM stations for an RDS station which broadcasts a program of that program type. * There are 15 program types to classify RDS stations. For details, refer to page 21.
Tuning operation m Other functions which make use of RDS data service The tuner has the following functions which make use of RDS data service. These are originally in operation [ON]. However, you can cancel these functions [OFF], if so desired. 1 ON (OFF) CT > CLOCK The tuner corrects the time of the built-in clock automatically by synchronizing it with the CT data on the RDS station being received.
English Playing back a tape Display information Each indicator mentioned with a number on pages 26–32 corresponds to the indicator with the same number on this page. 1 100 350 1K 3.
Playing back a tape Basic operation DISC 1 DISC 2 DISC 3 DISC CHANGE 1 Turn on the power. OPEN / CLOSE 2 Press INPUT 3–DISC CD CHANGER PTY SELECT PRESET/ TUNING/ BAND VOLUME 5 DOWN STANDBY UP or until “TAPE” (1, 5) appears on the display. A/B/C/D/E 2 TIMER 3 Open the tray by pressing . 4 Load the tape on the tray with side A upward, and close the PROGRAM PHONES BASS B.
English Playing back a tape Winding the tape DISC 1 DISC 2 DISC 3 PTY SELECT DISC CHANGE OPEN / CLOSE PRESET/ TUNING/ BAND 1 Press or to wind the tape. Moves rapidly in the current tape running direction while winding. A/B/C/D/E VOLUME DOWN PROGRAM B.BOOST MUSIC UP INPUT FREQ PS/PTY/RT/CT RANDOM Note When the tape is wound to the end, the tape deck will then function as described below. TIME : The tape stops at the end. MIN DOLBY NR REC/PAUSE AUTO/MANUAL TIMER to stop.
Recording DISC 1 DISC 2 DISC 3 DISC CHANGE PTY SELECT OPEN / CLOSE PRESET/ TUNING/ BAND A/B/C/D/E 2 VOLUME DOWN PROGRAM B.BOOST MUSIC UP INPUT FREQ PS/PTY/RT/CT RANDOM 4 INPUT MODE– PTY SEEK– START REPEAT HOUR MODE TIME MIN DOLBY NR REC/PAUSE AUTO/MANUAL MEMORY TIMER DISPLAY Basic recording TIME ADJ 5 1 STANDBY/ON 3 4 Notes ● Adjusting the VOLUME, BASS and TREBLE controls, B. BOOST and MUSIC buttons have no effect on the recorded sound.
To stop recording temporarily Press REC/PAUSE. of the tape deck to resume recording. * Press DISC 1 DISC 2 DISC 3 DISC CHANGE English Recording OPEN / CLOSE To stop recording Press PTY SELECT PRESET/ TUNING/ BAND of the tape deck. A/B/C/D/E VOLUME DOWN UP To change the disc and track when recording from a CD 1 Press PROGRAM B.
Recording Recording from CDs utilizing the EDIT function DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE The EDIT function performs recording on both sides of the tape. PTY SELECT PRESET/ TUNING/ BAND m EDIT recording A/B/C/D/E VOLUME DOWN UP 1 1 Press INPUT or once or more until “CD” (1, 5) appears on the display, and load the disc to be recorded. 2 Select the disc by pressing DISC SKIP. PROGRAM B.
m Auto-EDIT recording DISC 1 DISC 2 DISC 3 DISC CHANGE English Recording This function automatically changes the order of tracks so that the unrecorded space of side A is minimized. OPEN / CLOSE 1 Follow steps 1– 5 on previous page. PTY SELECT PRESET/ TUNING/ BAND 2 Press PROG. A/B/C/D/E 3 Press R. TIME. VOLUME DOWN UP “Auto A >>>” will light up during programming for side A, and “Auto B >>>” will light up during programming for side B. PROGRAM MODE B.
Recording m Manual EDIT recording DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE You can program tracks manually while watching the remaining time on both sides of the tape. PTY SELECT PRESET/ TUNING/ BAND 1 Press INPUT A/B/C/D/E or once or more until “CD” (1, 5) appears on the display, and load a disc (or discs) on the disc tray. VOLUME DOWN UP 1 PROGRAM B.BOOST MUSIC INPUT FREQ PS/PTY/RT/CT RANDOM HOUR MODE 3 Press PROG.
Use an external unit connected to the VCR, VIDEO or AUX/ MD terminals on the rear of the main unit. DISC 1 DISC 2 DISC 3 PTY SELECT DISC CHANGE OPEN / CLOSE PRESET/ TUNING/ BAND m To listen to or watch a source played on an external unit connected with this system A/B/C/D/E 3, 2 VOLUME DOWN UP 1 Select the input source (VIDEO, VCR or AUX/MD) you want to play by using INPUT 1, 1 PROGRAM B.BOOST MUSIC INPUT FREQ PS/PTY/RT/CT RANDOM or . 2 Play the source.
Various sound control 1 3 2 BASS BOOST 100 350 1K 3.5K 10K MUSIC ROCK POPS JAZZ CD PROGRAM PRO LOGIC HALL 3 STEREO YMERSION 4 VOLUME 5 1 Spectrum analyzer 3 VOLUME (volume level meter) The spectrum of the input source which is divided in five bands will be indicated in real time. 4 MUSIC (preset equalizer mode indicator) 2 BASS BOOST 5 PROGRAM (sound field program indicator) General sound control B. BOOST PROGRAM B.
m Listening with headphones ● PHONES ● DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE 3–DISC CD CHANGER PTY SELECT PRESET/ TUNING/ BAND English Various sound control Be sure that your headphones have a 3.5 mm (1/8”) diameter plug and between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms. When you listen with headphones, connect the headphones to the PHONES jack. You can listen to the sound that is normally output from the front speakers through headphones.
Various sound control Sound field processor The Sound Field Processor built into this system enables you to enjoy listening to a source with an ambience of actual concert hall or three-dimensional acoustics. This system provides preset sound field programs shown below. You can enjoy an excellent sound field by selecting one of them, and adding desired adjustments. This system also incorporates a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of Dolby Surround encoded video sources.
m Listening to the music with a sound field effect DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN / CLOSE 1 Play a source. 2 PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E VOLUME DOWN English Various sound control UP Press PROGRAM once or more until the name of the desired program is illuminated on the sound field program indicator (5). * Whenever you press PROGRAM, the program changes and is displayed as follows. PROGRAM PROGRAM PRO LOGIC PROGRAM PROGRAM 3 STEREO PROGRAM MODE B.
Various sound control If desired, you can adjust the sound output level of the center and/or rear speakers even if the output level is already set in “Speaker balance adjustment” on page 10. CENTER LEVEL 1 1 2 2 3 3 6 6 7 7 8 8 4 4 5 5 9 0 A TIME B PROG C R. TIME D EDIT +I0 MODE REPEAT RANDOM PRESET E 1 Press CENTER/REAR/DELAY once or more until “CENTER” appears on the display.
English Using the built-in timer Timer play DISC 1 DISC 2 DISC 3 DISC CHANGE By using the built-in timer, you can set the time when this system turns on and a source play begins, and the time when this system will be set to the standby mode automatically. OPEN / CLOSE 1 Press DISPLAY. PTY SELECT PRESET/ TUNING/ BAND Whenever DISPLAY is pressed, the display mode changes as follows. A/B/C/D/E VOLUME DOWN PROGRAM B.
Using the built-in timer Timer recording DISC 1 DISC 2 DISC 3 DISC CHANGE 1 Follow steps 2–3 of “Basic recording” on page 28. OPEN / CLOSE 2 Tune in to the station you want to record. 3 Follow step 1 of “Timer play” on page 39. PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E VOLUME DOWN PROGRAM B.
English Appendix Troubleshooting Refer to the chart below when this system does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. General Problem Cause What to Do This system does not work normally. There is an influence of strong external noise (lightning, excessive static electricity, etc.) or the system was operated incorrectly.
Appendix Tape deck CD player Problem What to Do Cause A disc cannot be played back normally, or there is a noise during play. The disc is not a standard type. Play another disc. Play will not begin even if disc is loaded. Disc is upside down. Load disc label side facing up. Disc is dirty. Clean disc. No sound. The input source selection is incorrect. Select the CD player by pressing INPUT or button until “CD” is illuminated on the display. Sound stops suddenly (always at the same spot).
Specifications n Amplifier section n Tape deck section Minimum RMS Output Power per Channel FRONT 6 ohm, 1 kHz, 0.9% THD ..................................... 80W+80W CENTER 6 ohm, 1 kHz, 0.9% THD .............................................. 80W REAR 6 ohm, 1 kHz, 0.9% THD .............................................. 25W Type .................................... Auto reverse stereo cassette deck Input Sensitivity/Impedance AUX/MD .....................................................
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.