Specifications

GX-707/GX-707VCD

GX-707/VCD

■ TEST MODE

To facilitate inspection, measurement and location of any faulty point, 6 types of built-in Test Modes are provided,

one for each section.

• System Test Mode : Test mode for the system section. It is also used when entering the test mode for each section.

• Receiver Test Mode : Test mode for the receiver section

• Tape Test Mode : Test mode for the deck section

• CD Test Mode : Test mode for the CD section

• MD Test Mode : Test mode for the MD section (unused for this unit)

• All Function Test Mode : Test mode for all functions

■ SYSTEM TEST MODE

This test mode is used for the system section. Also, this mode must be executed first when entering the test mode

for each section.

Starting Procedure

In the STANDBY mode, press the STANDBY/ON button while pressing the RANDOM button and the PLAY/

PAUSE(CD) button simultaneously. Once the SYSTEM TEST MODE is set, causal factors for the previous power

off appear on the FL display.

Causal factors for power off at starting

Display Description

<Key Operate Power off by button operation

<Off Timer Power off by Off Timer setting

<Sleep Timer Power off by Sleep Timer function

<Auto Off Power off by Auto Power Off function

<I-Protect Power off by detection of an abnormal current value

<V-Protect Power off by detection of an abnormal voltage value

<Temp Over Power off by detection of an abnormal temperature value

<AC Cut Power off by AC power cut

<?? Unknown

Operation Procedure (Selection/finalizing of TEST MODE for each section)

1) Select the TEST MODE by the section name, pressing the wINPUT (up) or qINPUT (down) button.

Display Description Ref. page

<Key Operate Causal factors for power off are displayed. 14

(This state is available immediately after starting.)

Test RECEIVER RECEIVER TEST MODE 15

Test TAPE TAPE TEST MODE 16

Test CD CD TEST MODE 17

Test MD MD TEST MODE (Unused for this unit) —

Test All Func ALL FUNCTION TEST MODE 18

Escape Test The test mode is canceled. —

2) Pressing the MUSIC button will shift the mode to the selected test mode.

For the details of the selected test mode, refer to the Ref. page in the above step 1).