Operation Manual
E-23
English
Tuning operation
■ Other functions using the RDS data
service
The tuner has the following functions which uses the RDS
data service. These functions are originally set to ON;
however, you can cancel these functions [OFF], if so
desired.
1 ON (OFF) CT > CLOCK
The tuner automatically corrects the time of the built-
in clock by synchronizing it with the CT data on the
RDS station being received.
* If you receive an RDS station of some other
country, the built-in clock is synchronized with
the time setting of that country.
* If the built-in clock is not yet set for the current
time or reset due to a power failure etc., it will be
set for the time of the CT data automatically,
whether this setting is ON or OFF.
2 ON (OFF) LOCAL > CT
If the RDS station being received employs the local
time (summer time etc.) data service, its time is
displayed in the CT mode.
* If the setting of function 1 is “ON”, the built-in
clock is synchronized with the local time data.
3
ON (OFF) A.M.–RDS (AUTO MEMORY > RDS)
Only RDS stations are searched instead of all FM
stations by the automatic preset tuning operation when
the setting is ON. (Refer to page 18 for the operating
procedure.)
If you switch this function OFF, not only RDS
stations but also other FM stations are programmed
along with AM stations by the automatic preset tuning
operation.
To switch these functions on and off
1 Select the FM band by pressing the PRESET/
TUNING/BAND, and confirm it on the display.
2 Press DISPLAY to display the current time.
3 Press FREQ PS/PTY/RT/CT.
The title of function 1 “ON CT > CLOCK ” is
displayed.
4 Select the title of function whose setting you want to
switch by pressing MODE-PTY SEEK once or more.
5 Switch the function ON or OFF by pressing PTY
SEEK-START, and confirm it on the display.
6 Press FREQ PS/PTY/RT/CT again to restore the
frequency display mode.
* If the station has PS data, it turns into the PS mode
after the frequency display mode returns.
Notes
• Once the setting is changed, it will be stored until it is changed
again by the above operation.
• During the operation, if there is no operation for about 20
seconds, this mode is canceled and turns into the frequency
display. If the station has PS data, it turns into the PS mode
after that.
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
YMERSION B.BOOST MUSIC
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
OPEN
/
CLOSE
MODE DOLBY NR
REC
/
PAUSE
AUTO
/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME DISPLAY
MIN
PTY SELECT
R
.
D
.
S
FREQ PS
/
PTY
/
RT
/
CT
MODE
–
PTY SEEK
–
START
DIGITAL AUDIO
1
2
3
5
2
4
3, 6
1